TOSHIBA M50 4-8
Operating Basics
B. Disable/Enable the Wake-up On LAN feature
Once configured as described above, you can disable/enable this feature
through the following steps:
1. Within Windows, click [Start]->[Control Panel]->[Toshiba HWSetup] and
then select the [LAN] tab.
2. Select [Enabled] or [Disabled] as appropriate within the Wake-up on LAN
section.
3. Click [Apply] and then click [Yes] to restart the system.
Wireless LAN
The wireless LAN is compatible with other LAN systems that comply with
the IEEE 802.11a+g or 802.11g wireless LAN standards.
It supports the following:
■ Automatic Transmit Rate Select mechanism in the transmit range of 54,
11, 5.5, 2 and 1 Mbit/s.
■ Advanced Encryption Standard (AES) data encryption, based on 128bit
encryption algorithm. (Revision G, A/G combo type.)
■ Frequency Channel Selection (5GHz and 2.4 GHz)
■ Roaming over multiple channels
■ Card Power Management
■ Wired Equivalent Privacy (WEP) data encryption
Wake-up on LAN does not function on a Wireless LAN.
