A SERVICE OF

logo

3
SAVE THESE INSTRUCTIONS
Thank you for purchasing the Heritage Desk Lamp. Please read the following
safety information before using. To reduce the risk of fi re, electrical shock, or
injury to persons:
Do NOT dismantle.
Do NOT alter power cord.
Turn off/unplug and allow to cool before replacing bulb or cleaning.
For indoor use only.
This portable lamp has a polarized plug (one blade is wider than the other). As
a safety feature, this plug will fi t in a polarized outlet only one way. If the plug
does not fi t fully in the outlet, reverse the plug. If it still does not fi t, contact a
qualifi ed electrician. Never use with an extension cord or adapter unless plug
can be fully inserted. Do not attempt to defeat this safety feature.
The Heritage Desk Lamp is an electrical device. DO NOT USE NEAR WATER
IMPORTANT SAFETY INSTRUCTIONS
GENERAL PRECAUTIONS
Before plugging in the Heritage Desk Lamp, check to make sure the voltage
corresponds with the main voltage of your location (120 volts).
Do not use the Heritage Desk Lamp outside or in wet locations such as
bathrooms. It is intended for indoor, dry use only.
Not for use with light dimmers, timers, motion detectors or extension cords.
This product may cause interference with radios, cordless telephones,
or devices that use a wireless remote control, such as televisions. If
interference occurs, move the product away from the device, plug the
product or device into a different outlet, or move the lamp out of the line of
sight of the remote control receiver. This lamp complies with part 18 of FCC.
The light bulb may become loose during transit. To reinstall the light bulb,
see the bulb installation instructions on page 7.
Do NOT use lubricating agent in assembly; please see troubleshooting
section or call Client Relations if you are having diffi culty assembling your
lamp (1-800-786-6850).
Unplug from electrical outlet for extended periods of non-use or during
lightning storms to ensure protection of the electronics.