ViewCast 2120 Manual

A SERVICE OF

next previous

Chapter 1: Overview

12 ViewCast

Niagara 2120 Front Panel

You should familiarize yourself with the front panel controls for the Niagara 2120. Besides the basic

buttons for power, start/stop, and audio volume control, several indicator lights also exist. Figure 2

and Table 2 below illustrate the buttons and lights that constitute the front panel functions and

interfaces.

Figure 2. Niagara 2120 Front Panel

Table 2. Front Panel Lights and Button Descriptions

Item

Control Button

Name

Description

A

Power Button

with Indicator

Light

 Starts the Niagara 2120.

 Indicator light (blue) blinks to indicate power up

activity.

 Press this button once to turn off the Niagara 2120

when it is on.

 Remains solid when set to allow you to encode.

 Press and hold for 5 seconds to execute an immediate

power off.

IMPORTANT! Use this only when the system does

not respond.

B

Reset Button

 Resets the Niagara 2120.

 Use a pointed device to insert in the hole and press the

reset button.

 This button has three different options:

 Press and release after the first set of 10 LEDs start to

light (approximately three seconds) to reboot the

Niagara 2120.