A SERVICE OF

logo

User Guide 13
Installation Topics
Installing the Firebox cables
Connect the power cable to the Firebox power input and to a power source.
The Quick Setup Wizard recommends that you use a straight ethernet cable (green) to connect your man-
agement station to a hub or switch. Use another straight ethernet cable (green) to connect your Firebox
to the same hub or switch. Then, use the instructions in the Quick Setup Wizard to connect to the Fire-
box.
You can also use a red crossover cable to connect the Firebox trusted interface to the management station
Ethernet port.
255.255.255.224 /27
255.255.255.240 /28
255.255.255.248 /29
255.255.255.252 /30