10
When moving range, slide range onto
cardboard or hardboard to prevent
damaging the floor covering.
If removing the range is necessary for
cleaning or maintenance:
1. Unplug range or disconnect power.
2. Slide range forward to complete
cleaning or maintenance.
3. Make sure the anti-tip bracket is
installed:
• Look for the anti-tip bracket securely
attached to floor.
• Slide range back so rear range foot
is under anti-tip bracket.
anti-tip
bracket
range foot
4. Check that range is level.
5. Plug in range or reconnect power.
If range does not
operate:
ࠜ Check that the circuit breaker is not
tripped or the house fuse blown.
ࠜ Check that the power supply cord is
plugged into the outlet.
ࠜ See Use and Care Guide for
troubleshooting list.
If you need assistance:
If you have questions about operating,
cleaning or maintaining your range:
ࠜ Refer to Use and Care Guide.
ࠜ Call the Customer Interaction Center.
Check your Use and Care Guide for a
toll-free number to call or call the
dealer from whom you purchased
this appliance. The dealer is listed in
the Yellow Pages of your phone
directory under “Appliances —
Household — Major — Service and
Repair.”
If you need service:
Maintain the quality built into your range
by calling an authorized service
company.
To obtain the name and number of the
authorized service company:
ࠜ Contact the dealer from whom you
purchased your range; or
ࠜ Look in the Yellow Pages of your
telephone directory under
“Appliances — Household — Major
— Service and Repair;” or
ࠜ Call the Customer Interaction Center.
The toll-free number is listed in your
Use and Care Guide.
When you call, you will need:
ࠜ The range model number.
ࠜ The range serial number.
Both numbers are listed on the
model/serial rating plate located on the
oven frame behind the storage drawer
panel.
