Whirlpool Use and Care Guide–No-Frost Refrigerator-Freezer–Model ET16AK
8
To change your refrigerator light bulb, do the following:
1. Reach behind Control Console to find bulb.
2. Unscrew bulb.
3. Screw a 40-watt appliance bulb in to socket (See Figure 9).
CHANGE THE LIGHT BULB...
Using Your Refrigerator (Connued...)
Electrical Shock Hazard. Electricity can
cause death or serious injury. Always
make sure wall receptacle and plug are
grounded prior to plugging in refrigerator.
To adjust the shelving, do the following:
1. First, remove the food from shelf.
2. Slide shelf straight out to stop.
3. Lift front (See Figure 10).
4. Slide the rest of the way out.
To replace the shelving, do the following:
1. Fit back of shelf on top of guides with wire stops on the bottom of guides.
2. Lift front, slide shelf in until it clears guide stops.
ADJUST THE REFRIGERATOR SHELVES...
Shelf guide
Shelf Stop
Guide Stop
To remove the shelf, do the following:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
To adjust the shelf, do the following:
1. Remove food from shelf.
2. Remove shelf
3. Remove supports by sliding upwards (See Figure 11).
4. Replace supports on desired level.
5. Replace shelf.
REMOVE AND ADJUST THE FREEZER SHELF...
Shelf Support
Change The Light Bulb (Figure 9)
Adjust The Refrigerator Shelves (Figure 10)
Remove And Adjust The Freezer Shelf (Figure 11)
