Using your range
OVEN
SURFACE
OVEN LIGHT
CONTROL BURNER
SWITCH
LEFl FRONT
I \
LEFT REAR
RIGHT FRLT
RLT REAR
CONTROL KNOB
CONTROL KNOB
CONTROL KNOB
CONTROL KNOB
Using the Surface Burners
These ranges are equipped with standing pilots. Standing pilots must be lit
initially with a match following the directions on page 9. The pilot light will
remain lit when the burners are turned off. To turn a burner on again, just push
In and turn the control knob to LITE and the burner will light.
Control knobs must be pushed in,
then turned to LITE position.
After the burner lights, turn the control
knob back to a desired setting.The
control knob can be set anywhere
between HI and a low setting. Do not
cook wtth the control In the LITE
posttlon.
Surface Burner Indicators
The solid dot in the surface burner
indicator shows which surface burner
is turned on by that knob.
6
