![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/1/cc/1cc2e0da-80d6-49e4-8588-02bdf3c91505/1cc2e0da-80d6-49e4-8588-02bdf3c91505-bg29.png)
32
Troubleshooting
Please go to the YAMAHA CD-R/RW Drive web site for the latest support
information, including troubleshooting information.
YAMAHA CD-R/RW Drive web site
URL: http://www.yamaha.co.jp/english/product/computer/
Europe
URL: http://www.yamaha-it.de/
The CRW-70 drive does not turn on.
●
●●
● Are the AC adapter and the power cable connected correctly?
Make sure that the CRW-70 drive is correctly connected to the AC
outlet, using the AC adapter and power cable provided. (→P. 19)
●
●●
● Does the power LED of the CRW-70 drive light up orange if the
power switch is turned on? (→
→→
→P. 20)
If the power LED doesn’t light up, consult your nearest Yamaha dealer
(listed at the back of this manual).
The computer does not start up.
●
●●
● Is the USB interface card installed correctly?
Refer to the documentation that came with your USB interface card.
The CRW-70 drive is not recognized by the operating system. (→
→→
→P. 22)
●
●●
● Is the CRW-70 drive correctly connected to the computer using the
USB cable?
Turn off the computer and the CRW-70 drive and make sure that the
USB cable is connected securely to both the computer and the drive.
(→P. 18, 21)
●
●●
● For Windows 98 Second Edition, have you installed the device driver
provided?
Windows 98 Second Edition does not recognize the CRW-70 drive
unless the device driver provided is installed. Install the device driver
following the instructions of the separate manual, “Device Driver
Installation Guide,” that came with your drive.