Yamaha DSP-AZ1 Manual

A SERVICE OF

next previous

E-38

SPEAKER OUTPUT LEVELS

This section explains how to set the speaker output levels using the test tone generator. The “TEST DOLBY SUR.” is for balancing the

output levels of the six speakers required for surround sound systems. The “TEST DSP” is for balancing the front effect speakers with the

main speakers for the DSP sound field programs.

■ Button/switch to be used for adjustment ■ Before you begin

1 Set BASS, TREBLE and BALANCE on the front panel

to the center position.

2 Turn off BASS EXTENSION.

3 Set PARAMETER/SET MENU on the remote control to

PARAMETER.

Cautions

• Since this unit cannot enter the test mode while headphones are

connected to this unit, be sure to unplug the headphones from the

PHONES jack when using the test tone.

• If the headphone is connected while “TEST DOLBY SUR.” or

“TEST DSP” is being used, the testing mode will be cancelled.

PUSH

TV VOL CH

VOLUME

DISC

PRESET

A/B/C/D/E

TV MUTE

TV INPUT

MUTE

EFFECT

STEREO

ON SCREEN

SLEEP

LEVEL

TEST

SET MENU

PARAMETER

PARAMETER/SET

MENU

TEST

BASS TREBLE

LR

BALANCE

BASS

EXTENSION

SET MENU

PARAMETER