H11 Owner’s Manual
46
ENGLISH
Data Backup
Restoring the Backup Data
The backup data in a USB flash memory device can be restored to the instrument.
1 Engage the Backup mode.
Make sure that the USB flash memory device containing the restore data
“H11.bup” is connected to the instrument, then press the [VOICE] button while
holding the [BGM] button.
2 Enable the Restore mode.
Press the [+/YES] button.
CAUTION
To cancel restore, press any button (except [PLAY/STOP], [–/NO], or [+/YES]) before
pressing the [PLAY/STOP] button in step 3.
3 Start the restore operation.
Press the [PLAY/STOP] button.
When the restore operation is finished, an “End” message appears on the dis-
play.
4 Exit from the Restore mode.
Press the [–/NO] or [+/YES] button.
Operation
rst
