A SERVICE OF

logo

Preparing the Printer for Use
8
P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/10
c. Press PLUS (+) to select PRINT.
If the media and ribbon are loaded correctly, a printer configuration label prints. A
sample label is shown here.
d. To exit Setup mode, press
SETUP/EXIT, and then press NEXT/SAVE.
12. To test the connection between your printer and your computer, use a label design package
to create a sample label and send it to the printer. Zebra recommends ZebraDesigner Pro.
You can download this software from http://www.zebra.com/software and operate it in
Demo mode to print a sample label.
Xi4 RXi4