22
ES-315-F Quick Start Guide
V If you cannot access the ES-315-F, have
problems accessing the Internet through the
ES-315-F, or forget the password, you may
need to reset the ES-315-F to its factory
defaults. If you do this, all configured information
is lost. To restart the ES-315-F, hold the RESET
button on the rear panel in for three to five
seconds.
6 Wall-mount the ES-315-F
Take the following steps to hang your ES-315-F on a wall.
1 Select a position free of obstructions on a sturdy wall.
2 Drill two holes for the screws, exactly 104 mm apart.
1 Be careful to avoid damaging pipes or
cables located inside the wall when
drilling holes for the screws.
