ES-2048 User’s Guide
236 Chapter 31 Introducing Commands
bpdu-control
<peer|tunnel|di
scard|network>
Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
13
no egress set
<port-list>
Disables the outgoing traffic port
list for a port-based VLAN.
13
protocol-based-
vlan ethernet-
type <ethernet-
type>
Disables protocol based VLAN of
the specified protocol on the port.
13
igmp-immediate-
leave
Disables IGMP immediate leave on
the port.
13
igmp-filtering
profile
Disables IGMP filtering on the port. 13
igmp-group-
limited
Disables IGMP group limitation. 13
ingress-check
Disables ingress checking on the
port(s).
13
gvrp
Disable GVRP on the port(s). 13
flow-control
Disables flow control on the port(s). 13
vlan-trunking
Disables VLAN trunking on the
port(s).
13
mirror
Disables port mirroring on the
port(s).
13
diffserv
Disables differentiated services on
the ports.
13
bandwidth-limit
Disables bandwidth limit on the
port(s).
13
bandwidth-limit
<cir | pir |
egress >
Disables the specified bandwidth
limits on the port(s).
13
broadcast-limit
Disables broadcast storm control
limit on the switch.
13
multicast-limit
Disables multicast limit on the
switch.
13
dlf-limit
Disables destination lookup failure
(DLF) limit on the switch.
13
ge-spq
Disables SPQ priority on the
specified gigabit ports.
13
inactive
Enables the port(s) on the switch. 13
intrusion-lock
Disables intrusion-lock on a port so
that a port can be connected again
after you disconnected the cable.
13
inactive
Disables the specified port(s) on
the switch.
13
Table 74 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
