A SERVICE OF

logo

Chapter 2 Hardware Description and Connection
GS1100 Series User’s Guide
19
Attaching the Mounting Brackets to the Switch
1 Position a mounting bracket on one side of the Switch, lining up the four screw
holes on the bracket with the screw holes on the side of the Switch.
Figure 11 Attaching the Mounting Brackets (GS1100-16)
Figure 12 Attaching the Mounting Brackets (GS1100-24)
2 Using a #2 Philips screwdriver, install the M3 flat head screws through the
mounting bracket holes into the Switch.
3 Repeat steps 1 and 2 to install the second mounting bracket on the other side of
the Switch.
4 You may now mount the Switch on a rack. Proceed to the next section.