NetAtlas Workgroup Quick Start Guide
7
4 SNMPc Network Manager Startup
To start the SNMPc Network
Manager manually, use the Windows
Start menu.
To start SNMPc automatically each
time you turn on your computer, click
Config, System Startup, select
Auto Startup and then click OK.
Conversely, clear this check box if
you do not wish SNMPc to automatically start each time you turn on
your computer.
5 Compile MIBs
Management Information Base (MIB) is designed for holding
management information on systems. ZyXEL private MIBs contains
information for devices that the standard MIB does not include. During
the EMS installation, ZyXEL private MIBs are automatically added into
the SNMPc MIB database.
1 From the SNMPc Network Manager
main screen, click Config, MIB
Database.
2 Click Compile in the Compile Mibs
screen.
3 Click Yes when asked to confirm, then
click OK.
4 Finally click Done in the Compile Mibs screen.
6 Add Your Device
The SNMPc Network Manager is able to find new devices automatically
using auto-discovery (enabled by default) or you can add device(s)
manually.
