PES-1014 User’s Guide
B System Parameters
CATEGORY DEFAULT
VALUE
OPTIONS NOTE
Set Default Route N/A in-band The default transmission path of the switch
SNMP
SNMP Community
Community public 1-12 characters Name an SNMP community (case-sensitive)
Access Right read-write read-write/read The access right of the community member
Trap Receiving enable enable/disable The capability of the community to receive SNMP traps
Status enable enable/disable To activate/deactivate the community for SNMP
management use.
SNMP Host A management station
IP Address N/A users' IP address Indicate the IP addresses of SNMP hosts
Host Name N/A 1-12 characters Give a name to the host (case-sensitive)
Community N/A names of the 4
commu.
The community that the management host belongs to (case-
sensitive)
Status disable enable/disable Allow/disallow an IP address to function in SNMP
Port
Port Configuration
Port ID N/A any port in the switch Select a port to set its configuration
Port Name N/A 1-255 characters Give the selected port a name for convenience (case-
sensitive)
Access Status enable enable/disable Turn on/off access to a port
Connector TX N/A The connector type of the port (FX-fiber port, TX-Ethernet
port)
Security disable enable/disable Turn on/off the capability to discard packets that violate
security parameters
Address Learning disable enable/disable The capability of dynamic address learning
Full Duplex Flow
Control
enable enable/disable The capability of 802.3x full duplex flow control
Auto Negotiation enable enable/disable The capability to automatically negotiate transmission rate
and duplex mode
Speed/Duplex 100/Full 100/10-Full, 100/10-
Half
Set the speed (100/10 Mbps) and duplex mode (Full/Half)
Broadcast Storm
Control
enable enable/disable The capability to discard broadcast packets exceeding the
threshold number
Port Assignment
Source Port N/A any port A port from which the settings will be duplicated to another
port
Target Port N/A port except source
port
A port to which the settings will be duplicated
Item N/A 1-7 items Items of settings to be duplicated
