Filter
Top Products
13
4-SPECIFICATIONS
2011 June
a80f-if-NA
4.1 Power Requirements
115V, 60 Hz, 2.8 Amp
5.2 bar gauge pressure [75 PSIG], 28 litre/min @ 21°C, 1.01 bar [1.0 SCFM]
at random cycle rate.
4.2 Operating Rate:
Belt speed is 0.37m/s [72 F.P.M.]
IMPORTANT SAFEGUARD
4.3 Operating Conditions
Use in dry, relatively clean environments at 4.4 C to 48.9
o
C [40
o
F to 120
o
F] with clean, dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.
• To reduce the risk associated with fi re and explosion hazards:
− Do not operate this equipment in potentially fl ammable or explosive environments.
WARNING
Actual production rate is dependent on operator's dexterity. Boxes must be 18 inches (457mm) apart minimum.
4.4 Box Board
125 to 275 P.S.I. bursting test, single wall B, or C fl ute.
4.5 Box Weight and Size Capacities
A. Box weight, fi lled – weight must be suffi cient to actuate center cam located between powered conveyor rollers,
2 kg [4 lbs] minimum, 29 kg [65 lbs] maximum.
B . Box Size: Minimum Maximum
Length 150mm [6.0 inch] 635mm [25 inch]
Width 120mm [4.75 inch] 495mm [19.50 inch]
Height 120mm [4 .75 inch] 510mm [20 inch]
Special modifi cations may be available for carton sizes not listed above.
Contact your 3M Representative for information.