3M 11000 Life Jacket User Manual


 
16
6.1 Uncrating
Cut straps. Cut out staple positions along the bottom
of the shipping box or remove staples with an
appropriate tool (Figure 6-1)
After cutting out or removing the staples, lift the
shipping box in order to clear the conveyor
Note: Two (2) persons required.
Transport the conveyor with a fork-lift truck to the
operating position. Lift the pallet at the point
indicated in Figure 6-2 (weight of machine
crated = See Speci cations).
Removal of Pallet
Using a 10mm combination wrench, remove the fas-
teners that secure the Infeed Conveyor/Case Sealer
legs to pallet at each leg (as shown in Figure 6-3).
6.2 Disposal of Packaging Materials
The a80f-if package is composed of:
- Wooden pallet
- Cardboard shipping box
- Wooden supports
- Metal xing brackets
- PU foam protection
- PP plastic straps
- Dehydrating salts in bag
- Special bag of laminated polyester/aluminium/
Polyethylene (sea freight package only)
- Polyethylene protective material
For the disposal of the above materials, please follow
the environmental directives or the law in your country.
6-UNPACKING
Figure 6-1
Figure 6-3
Figure 6-2
2011 June
a80f-if-NA
Fasteners