Filter
Top Products
1312
Silence a Sounding Alarm
The alarm sounds initially for a few minutes, then silences itself. The alarm then
sounds every few minutes afterwards until one of the following happens:
1. “SNOOZE” - Press any button. Alarm silences, but sounds again if the alarm
condition reoccurs.
2. Turn the alarm “OFF” - Deactivates the alarm.
Using the Professional Weather Center
Weather Forecast
AcuRiteʼs patented Self-Calibrating Forecasting provides your personal forecast
of weather conditions for the next 12 to 24 hours by collecting data from the
sensor in your backyard. It generates a forecast with pinpoint accuracy -
personalized for your exact location.
“Learning Mode”
Self-Calibrating Forecasting use a unique algorithm to analyze changes in
pressure and temperature over a time period (called Learning Mode) to
determine your altitude. After 14 days, the Learning Mode icon disappears
from the display screen. At this point, the self-calibrated pressure is tuned in to
your location and the unit is ready for superior weather prediction.
Barometric Pressure
Subtle variations in barometric pressure greatly affect the weather. This
weather forecaster displays the current pressure, direction it's trending
(FALLING, STEADY, or RISING) and a pressure chart. The chart tracks and
displays the change in pressure so you can monitor the rate of change over
time.
Rainfall Event
The rainfall feature tracks rain accumulation over all-time, the current month,
and current rainfall event. Current event clears when no rain registers for 8
hours OR no rain registers for 1 hour and pressure rises by .03inhg or more.
Programmable Weather Alarms
Each Selectable Weather Category features an alarm option. When an alarm
sounds, the display unit emits an audible beeping and flashes the affected
category, its alarm settings, and any other relevant data.
Some alarms can be customized to alert you when your programmed value is
reached. Alarms include: outdoor temperature, outdoor humidity, wind speed,
heat index, dew point, wind chill, indoor temperature and indoor humidity.
The rain alarm does not require a preset numerical value, but instead sounds
as soon as rain is recorded. Similarly, the storm alarm sounds when a large
atmospheric pressure drop occurs, which usually indicates an oncoming storm.
Note: The storm alarm is NOT intended to be a safety device or warning system.
SNOW
LIKELY
MOSTLY
CLOUDY
CLOUDY
PARTLY
CLOUDY
RAIN
LIKELY
(flashing=stormy)
RAIN/SNOW
MIX LIKELY
(flashing=stormy)
View the complete list of icons at www.AcuRite.com/acurite-icons
OPERATION
Set a Weather Alarm
1. Choose the weather category for which you wish to set an alarm by
pressing the up or down arrow buttons until the category is displayed on
the Selectable Category part of the display unit.
2. To program a value (only applies to alarms that require a value), press
AND HOLD the “ ” button until the “SET” indicator appears in the
area of the display labeled “ALARM” (left of the selected weather
category) and the alarm setting flashes.
3. Adjust the alarm value by pressing the up or down arrow buttons.
4. Press the “ ” button to confirm a value.
5. Next, press the “ ” button to activate the alarm. The alarm ON
indicator will highlight on the display.
Alarm is now programmed and turned on.
To activate or deactivate an alarm:
Press “ ”
To set or adjust an alarm value:
Press and hold “ ”