®
SeCtion 4 • Bilge & underwater gear
1. bilGe
a. fuel & oil spillaGe
b. Drain pluG
c. bilGe puMps
drain plug
(fig 4.1.1)
Drain
Run bilge pumps in the manual position only as
long as necessary to remove water. Running bilge
pumps dry can damage the pump motor.
! CAUTION
Sinking Hazard – Ensure the bilge pumps are
operating properly.
! WARNING
! DANGER
Install and tighten drain plug before launching boat.
Boat will sink if drain plug is not in place and tight.
Bilge puMp and float SwitCh
(fig 4.1.2)
Bilge Pump
Float Switch