Browning OtN Series 2000 Outboard Motor User Manual


  Open as PDF
of 16
 
5
OtN Series 2000
Gearmotors and Reducers
A
"O" RING
56C, 140TC
MOTOR
180TC - 280TC
MOTOR
A
One-Piece Splined Coupling (Type UE and U)
Notes:
1. Install motor shaft key onto motor shaft.
2. LubricatesplineteethofcouplingandinputshaftwithMobilgreaseXTCorequivalentcouplinggrease.
3. Installcouplingontomotorshaftandsettothespecieddistance.
Refer to table below (dimension "A") for correct setting distances.
4. Apply thread locking compound to set screw and install. Tighten into coupling.
5. Assemble motor to gear reducer engaging splined coupling and bolt the motor to the c-face.
Input
Type
Reducer Size
Motor
Size
A
(Inches)
OtN
UE 22, 23
56C,140TC 3.06
180TC,210TC 4.04
UE 24, 25
56C,140TC 3.12
180TC,210TC 4.11
250TC 4.75
280TC 5.64
U 26
140TC 3.86
180TC,210TC 5.34
250TC 5.34
280TC 6.31
 previous next