Filter
Top Products
SKU 66835 For technical questions, please call 1-800-444-3353. Page 4
cal known to the State of California
to cause cancer and birth defects or
other reproductive harm. (California
Health & Safety Code § 25249.5, et
seq.)
People with pacemakers should 23.
consult their physician(s) before
use. Electromagnetic elds in close
proximity to a heart pacemaker could
cause pacemaker interference or
pacemaker failure.
The warnings, precautions, and 24.
instructions discussed in this
instruction sheet cannot cover all
possible conditions and situations
that may occur. It must be under-
stood by the operator that com-
mon sense and caution are factors
which cannot be built into this
product, but must be supplied by
the operator.
SPECIFICATIONS
Continuous Power 800 Watts
Peak Power 1000 Watts
Input Voltage
12 Volts Nominal DC
(10-15VDC possible)
Output Voltage 120V/60Hz
Fuse 40A x 4 (Blade Type)
Indicators
Green LED = power on
Red LED = error (fault)
Switch Rocker type. ON/OFF
Output Wave
Form
Pure Sine Wave
Cables (not
included)
#4AWG or larger heavy duty
input
Outlets
2 - 120V grounded AC with
Ground Fault Circuit Interupt
Features
- Overload Shutoff @
15VDC
- Low Voltage Alarm @
10.6VDC
- Low Voltage Shutoff @
10VDC
-Cooling Fans x 2
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
COMPONENTS AND CONTROLS
Fan (8)
Switch
(15)
Negative
Terminal
(5)
Over-load
LED
Grounding
Terminal
(6)
Power
LED
Positive
Terminal (4)
Over-temp.
LED
Outlets (16)
GFCI
Test
GFCI
Reset
LED
Figure 1