Filter
Top Products
1
and tightening the pontoon webbing
attachment straps.
The goal is to find your balance point. When you
are floating in the boat it should be level in the
water.
12. Assemble the oars.
First assemble the two piece oars.
Then remove the cotter pins from the oar locks
attached to the upper part of the oars and slide
the oarlocks into the brackets on
the frame. Then adjust the rubber
oar stops evenly on both oars for
optimum rowing position.
13. The bladder repair kit.
Included with your boat are self-adhesive
tube patches to repair any tears or holes in
the pontoon bladders. We recommend storing
these in one of the pockets to keep it available
for repairs.
14. Do the final fitting and adjustments.
Sit in the boat on dry land and adjust the foot
pegs and oar lock placement to your leg length
and preference.
Float your Cimarron Pontoon Boat in shallow
water. Push off, get seated comfortably, place
your feet on the foot pegs and check to see if
you are level in the water. (This is easier with a
another person on shore). The goal is to find
your balance point. When you are floating in the
boat it should be level in the water.
Placing heavy cargo on the cargo deck may
necessitate moving the seat forward.
If you need to adjust the seat or foot pegs bring
the boat back to shore and make the needed
adjustments.
Practice going forward and backward a bit to
get comfortable. Then catch some fish and enjoy
your boat!