Filter
Top Products
Amps Meter and Overload Indicator
Amps Meter:
The amps meter indicates the current drawn from the battery. It will not indicate
the current drawn by other loads also connected to the battery. For long term
operation, the amps meter should remain in the green sections of the bar graph.
Current Overload:
The meter will enter the red section of the bar graph, the alarm will sound, the
overload indicator light will turn On, then the inverter will shutdown. The inverter
will continue to check for appropriate current levels while trying to restart the load.
NOTE A momentary sound of the internal alarm and/or flash
of the indicators or meters is normal at start up.
19
Nothing comes close to a Cobra
®
18
English
Power and Protection Indicators
•
The Power and Protection Indicators include, along with an audible alarm, an over
temperature indicator, an amps meter, a volts meter and an overload indicator.
Over Temperature Indicator
Temperature Overload:
The indicator light will turn On, then the inverter will shutdown. The inverter will
continue to check for appropriate temperature levels while trying to restart the load.
Volts Meter
The volts meter indicates the battery voltage level input.
For long term operation, the volts meter should remain in the green sections
of the bar graph. If the meter enters the red sections of the bar graph, the alarm
will sound and inverter will shutdown. The inverter will continue to check for
appropriate voltage levels while trying to restart the load.
Power and Protection Indicators
Operation
Power and Protection Indicators
Operation
Temp. Overload
Volts Meter
Current Overload
Amps Meter