Filter
Top Products
Advanced Operation
Nothing comes close to a Cobra
®
37
Advanced Operation
36
English
Advanced Operation
•
Channel 16
This function gives you quick access to the calling Channel 16 from any
operational mode.
To switch to Channel 16:
1.
Press the Channel 16 button to change to Channel 16.
To exit the
Channel 16 mode and return to whatever status
existed before entering this mode, press the Channel 16
button a again.
While in the
Channel 16 mode, you can also press
the Channel Up and Channel Down buttons to
change channels.
If you press this button when
Key Lock mode is On,
you will get a three-beep error message and your
radio will not change mode.
Tri-Watch
Tri-Watch gives you one button access to scan the three locations of
most importance to you. Channel 16 will always be one of the scanned
locations. The other two locations will be stored in the radio. They can
be edited and/or recalled for future engagements of
Tri-Watch mode.
NOTE
The radio must be squelched for tri-watch to function.
See page 31 for squelch procedure.
To program or edit the tri-watch locations:
1.
Press and hold the Tri-Watch button. The Tri-Watch
and Memory icons on the LCD will be turned On.
2. Press the Channel Up or Channel Down button
to move to the channel you want to enter into
tri-watch location one.
3. Press the Tri-Watch button. You will hear a
two-beep confirmation signal.
4. Press the Channel Up or Channel Down button
to move to the channel you want to enter into
tri-watch location two.
5. Press the Tri-Watch button. You will hear a
two-beep confirmation signal and the Memory
icon will disappear from the LCD. The radio will
immediately engage tri-watch (see page 38
for further details).
Operating Your Radio Operating Your Radio
Channel 16 Button
Channel 16
Channel Up/Down Buttons
Tri-Watch Button
Tri-Watch and Memory Icons
400-BR-F 6/23/04 2:12 PM Page 36