Filter
Top Products
4
A new innovation, the 83 kHz frequency offers superior sonar perform-
ance at all depths from very shallow up to 1,000 ft and provides up to
120º of fishfinding coverage.
Preparations
The following shows the recommended sequence for installing the
transducer:
CAUTION:
You should read over this entire installation section before drill-
ing any holes in your vehicle or vessel!
1. Determine the approximate location for the sonar unit, so you can
plan how and where to route the cables for the transducer and power.
This will help you make sure you have enough cable length for the de-
sired configuration.
2. Determine the approximate location for the transducer and its cable
route.