Eagle Electronics 640C Marine GPS System User Manual


 
63
Edit Route screen showing Route 1 with waypoints set to normal
navigation (left). Reverse command has been executed (center) revers-
ing the order of waypoints on the route. Pressing Navigate (right) will
allow you to navigate the route from the end to the beginning.
Trails
Delete a Trail
This is the command used to erase or delete a trail.
Press
MENU|MENU| to MY TRAILS|ENT| to trail name|ENT| to
DELETE TRAIL|ENT| to YES|ENT.
To Delete all trails at once
1. Press
MENU|MENU| to MY TRAILS|ENT.
2. Press to
DELETE ALL|ENT| to YES|ENT.
Edit a Trail Name
To edit a trail name press
MENU|MENU| to MY TRAILS|ENT| to trail
name|
ENT|ENT. Press or to change the first character, then press
to the next character and repeat until the name is correct. Press
ENT
then EXIT repeatedly to return to the previous page.
Tip:
You can quickly call up the Edit Trail menu by selecting a trail on
the map with the cursor. move the cursor over a trail and a pop-up
box appears. Press
WPT and the Edit Trail menu opens.