Filter
Top Products
EAGLE EHR-10 Operation Instructions 11
7. Locking the Keypad
Use H/L/LOCK key to activate the Key Lock function in order to avoid accidental key press of the
radio keypad.
To lock and unlock the keypad:
1. To lock the keypad, press and hold the H/L/LOCK key until the “Key Lock” icon appears on
the LCD display.
2. To unlock the keypad, press and hold the H/L/LOCK key again until the “Key Lock” icon
disappears from the LCD display.
NOTE: Once Key Lock is turned on, pressing the keys will have no effect except for the PTT key,
which is not affected by Key Lock.
8. Adding/Deleting Channels to/from Memory
Your radio can store any channel (except WX channels). The stored channels are also the channels
scanned in the Memory Scan mode.
To add channels to memory:
1. During normal operating mode, use or (UP/DOWN keys to select the desired channel
for saving.
2. Press and hold MEM key for 3 seconds. The “M” (Memory Channel) icon will appear,
indicating that the current channel has been saved into memory. Any number of channels can
be saved.
To delete channels from memory:
1. During normal operating mode, use or (UP/DOWN) keys to select the saved channel
you wish to delete. The “M” (Memory Channel) icon appears.
2. Press and hold MEM key for 3 seconds. The “M” (Memory Channel) icon disappears, and the
selected. The selected channel will be removed from the scan memory.
9. Accessing Channels Saved to Memory
Once channels have been saved, you can easily access them by pressing the MEM key.
In Memory mode, only the channels saved in memory will be accessible using the Up or Down
Channel keys.
To access saved channels:
1. Press the MEM key. The “Memory Mode” icon (the “M” with the inverted triangle above
it) appears on the LCD along with “M” (Memory Channel) icon to indicate that you are in
MEMORY mode.
2. Use the
or (UP/DOWN) keys to scan through the saved channels.
3. Press the MEM key again to regain access to all channels.