Filter
Top Products
44
display as shown on the previous page.
Three of these labels are window menus. Pressing the
key corresponding to one of the “window menu” labels
gives you a menu with functions that relate only to that
window. For example, if you press the F1 key which
corresponds to the window menu label on the plotter
window, the screen will clear and you will have the
normal plotter menu screen. To exit from a window
menu, press the CLR key. The fourth label tells you to
press the MENU key to see the windows main menu.
VIEWING WINDOWS
To see all of the available windows, press the WIN key,
then press the MENU key twice. The windows main
menu appears. Finally, press the F2 key (VIEW ALL
WINDOWS). The screen shown at right appears.
The first window appears in the upper right corner of the
screen. A description of the screen shows in the box at
the bottom of the screen. Now press the F2 key. This
switches to the next window and description. Press the
F1 key to view the previous window. When you’ve
finished viewing the windows, press the CLR key.
A summary of all the
windows and window
groups is in the back
of this manual.