Filter
Top Products
13
To remove the antenna, simply loosen the thumbwheels
until they won't turn. Carefully remove the antenna from
the unit by pulling it straight out. If you feel any resis-
tance, make certain the thumbwheels are at the end of
their travel. Don't force any parts.
Once you remove the antenna, you can see it's connec-
tor inside the left-hand thumbwheel. When reinstalling
the antenna, align the left side of the antenna first, then
thread left thumbwheel until it engages the connector.
This will require two full turns of the thumbwheel. After
you've accomplished this, thread the right side of the
antenna by rotating the right thumbwheel. Remember to
rotate the right thumbwheel in the opposite direction
from the left.
Adjust thumbwheels until the desired tension is achieved.
Caution - Do not overtighten the thumbwheels.