Filter
Top Products
39
GOTO CURSOR
As previously described, the cursor lines can be used to
place an icon or highlight a position. When you use the
cursor lines, the position of the cross hairs on the display
are shown at the top of the screen. Pressing the key
corresponding to the “GOTO CURSOR” label on the
plotter menu causes
the AccuNav Sport™
to show navigation
and steering data to
the position shown by
the cross hairs. This
automatically turns
the arrival alarm on.
To use this feature,
first move the cursor
lines to the desired
location on the plotter screen. Next, press the MENU
key. Now press the right arrow key once. The second
plotter menu screen appears as shown on the left side
of page 31. Finally, press the F4 (GOTO CURSOR) key.
The unit returns to the plotter screen as shown at left. A
waypoint flag appears on the screen (numbered “0”)
that was the location of the cursor cross hairs when you
pressed the F4 key.
All of the navigation displays on the AccuNav Sport™
will show navigation data to the location you marked.
This includes the navigation, steering, and plotter dis-
plays.
GRID LINES
The plotter can show latitude/longitude grid lines on the
plotter as shown on the next page. To turn these lines
on, press the MENU key while the plotter is displayed.