Filter
Top Products
50
to that waypoint from your present position shows be-
neath the position.
If the desired waypoint isn't shown, press the F1 or F2
keys until it appears on the screen. (Note: A faster way
to recall a waypoint is to press the F6 key, then enter the
waypoint number using the numbered keys.) When the
desired waypoint appears, simply press the F5 (GO TO
WAYPOINT) key. The AccuNav Sport™ returns to the
last used position, steering, or plotter screen, showing
navigation data to the waypoint you recalled.
Note: The AccuNav Sport™ will show navigation data to
a waypoint until the "Cancel Navigation" feature is used.
This feature stops the unit from navigating. If you turn
the unit off while it is navigating, the next time it's turned
on it will still navigate to the previous waypoint. If you
were navigating in a route when you turned the AccuNav
Sport™ off, the next time you turn it on, the unit will
remember where you were in the route at the time it was
turned off and resume navigation to the same waypoint
in the route.