Filter
Top Products
49
To erase a waypoint, first press the WPT key. Next,
press the F2 key. Now press the F1 (+ WPT) or F2 (-
WPT) key until the desired waypoint number appears on
the screen. Press the F4 key to erase the waypoint. The
screen shown below appears. A message appears on
the screen that says “WAIT!! DELETE WAYPOINT ARE
YOU SURE?”. If you
are certain this is the
waypoint that you
wish to erase, press
the F0 key. If not,
press the F5 key.
Pressing the F0 key
erases all information
from the waypoint
number that appears
at the top of the
screen.
To exit from the waypoint save menu, press the CLR
key.
RECALL A WAYPOINT
You must recall a waypoint in order to navigate to that
position with the AccuNav Sport™. To recall a waypoint,
first press the WPT
key, then press the
F4 (WPT RECALL)
key. The screen
shown at right ap-
pears.
The waypoint's num-
ber, name, and posi-
tion shows at the top
of the screen. The
distance and bearing