Filter
Top Products
69
BACKLIGHT ADJUST
The intensity of the backlighting is adjustable. To change
it, press the MENU key three times, then press the F2
(ADJUST BACK LIGHT LEVEL) key. A screen similar to
the one below appears. The light adjustment menu
shows at the bottom
of the screen. Press
the left arrow key to
decrease the light
level, the right arrow
key to increase it.
When the light is set
to the desired level,
press the CLR key to
erase this menu.
PRESET
The Preset feature returns all GPS units to their original
factory settings. This resets the units of measure, speaker
volume, display contrast, and more. This doesn’t erase
any waypoints or routes, however it does erase plotter
trails.
To preset the unit, press the MENU key until the “PRE-
SET UNIT” label appears. Press the key corresponding
to that label. The menu screen disappears and the
AccuNav Sport™ returns to the GPS position screen. All
units will be returned to their factory settings.