Filter
Top Products
56
MODIFYING A ROUTE
Any part of a route can be changed at any time. For
example, suppose you have a route consisting of way-
points number 2, 1, and 3 and you wish to change
waypoint number 3 to waypoint number 5. Simply press
the RTE key, then press the F1 key. Route number one
appears on the right
side of the screen.
The list of waypoints
used in the route are
shown beneath the
route number and
name. If this isn't the
route you wish to
change, press the F1
or F2 keys until the
desired route ap-
pears.
Using the down arrow key, move the black box to
waypoint number 3. Now press the ENT key. Use the
numbered keys to change the waypoint from 3 to 5.
Next, press the ENT key. You’ve changed the waypoint
from 3 to 5. Press the F3 key to save the route. Press the
CLR key to exit this screen. You can change any
waypoint used in a route, add or erase any waypoint, or
change the route name at any time using this method.
ERASING A ROUTE
To erase a route, first press the RTE key. Next, press the
F1 (SAVE/EDIT) key. Route number one appears on the
right side of the screen. The list of waypoints used in the
route are shown beneath the route number and name.
If you wish to erase a different route, press the F1 or F2
keys to cycle through the available routes. After you’ve
selected the desired route, press the F4 (ERASE) key.
This erases the route from memory. Finally, press the