Filter
Top Products
32
position to the cursor position show in the bottom left
corner of the display. Use the arrow keys to move the
cursor lines anywhere on the plotter. To erase the
cursor lines, press the CLEAR key. This will switch the
display at the top of the screen back to your present
position and erase the distance and bearing displays at
the bottom of the
screen.
PLOTTING WITH A WAYPOINT
Using the plotter with a recalled waypoint or route is an
easy way to see the distance and direction you trav-
elled. It also simplifies navigation. To use the plotter in
this manner, first recall a waypoint or start a route. (See
the Waypoint Recall section for more information.) Then
press the PLOT key.
A screen similar to
the one at right ap-
pears.
The circle with the “S”
is your starting loca-
tion. This was your
position when you
recalled the way-
point. The flashing
circle with a cross is