Filter
Top Products
5
ANTI-SKID
ANTI-SKID
The AccuNav Sport™ has a recess molded into the
back of the case and one-half of a plastic fastener
attached to the recess. When used with the other half of
the fastener, it keeps the unit from sliding on a level
surface such as a dashboard.
To use the anti-skid material, first remove the fastener
from the literature pack supplied with the AccuNav
Sport™. Select the location for this fastener and peel the
plastic backing from this half and press it onto the
mounting surface. Align this patch with the one on the
AccuNav Sport™, then press them together. It will hold
the unit under mild vibration, keeping it from sliding.
NOTE: The adhesive anti-skid patch is not designed to
hold the AccuNav Sport™ on a vertical or overhead
surface. It is only to be used to keep the unit from sliding
on a flat, horizontal surface.