Filter
Top Products
46
the waypoint number that your present position is stored
in. (Note: You can store a position under a waypoint
number that already has a position assigned to it using
this method.) To save your present position, press the
WPT key, then press the F2 (WPT SAVE) key. A screen
similar to the one below appears.
The first waypoint
number in the list ap-
pears at the top of the
page. This is the num-
ber that your present
position will be stored
under. Your position
at the time you
pressed the WPT key
is shown in the "CUR-
RENT POSITION"
box in the middle of the screen. If you wish to save the
location in the CURRENT POSITION box under this
waypoint number, first press the F5 (USE CURRENT
POSITION) key. The position shown in the CURRENT
POSITION box also will show in the waypoint location at
the top of the screen. To save the waypoint without
naming it, simply press the F3 (SAVE) key.
To save the location under a different waypoint number,
press the F1 (+ WPT) key to increase the waypoint
number (i.e. from waypoint number 1 to 2). Press the F2
(- WPT) key to decrease the waypoint number. Now
press the F5 key to use your present position. Finally,
press the F3 key. This will store the location under the
waypoint number you selected. Press the CLR key to
return to the last used position, plot, or navigation
screen.