Eagle Electronics 502C Fish Finder User Manual


 
96
Sounds command (left) and the Sounds menu shown at right.
Once in the Sounds menu:
To set Key Press Sounds: With the option highlighted, press ENT to
check it (turn on) and uncheck it (turn off.) After the option is set, press
EXIT|EXIT to return to the page display.
To set Alarm Sounds: Press to
ALARM SOUNDS. With the option high-
lighted, press
ENT to check it (turn on) and uncheck it (turn off.) After
the option is set, press
EXIT|EXIT to return to the page display.
To set Alarm Volume: Press to
VOLUME. Press or to move the
bar. The left end of the scale is low volume; the right end is high volume.
After the option is set, press
EXIT|EXIT to return to the page display.
To set Alarm Style: Press to
ALARM STYLE|ENT. Press or to
change the style, then press
ENT. After the option is set, press
EXIT|EXIT to return to the page display.
Track Smoothing
This is a factory setting on the GPS Setup menu that should always be
left on. When stopped or traveling at slow speeds (such as walking or
trolling), Track Smoothing prevents wandering of trails, the steering
arrow, compass rose and a map in track-up mode.
Track Smoothing option, turned on.