Filter
Top Products
3
Acceptable transducer mounting locations
Deep-V hull
* Position 1/2 to 1/3 length of the hull from stern.
* 15 to 30 cm from center line (inside first lifting strakes).
Figure 1-3 Transducer mounting location on deep-V hull
High speed V-planing hull
* Within the wetted bottom area
* Deadrise angle within 15
Figure 1-4 Transducer mounting location on high speed V-planing hull
Typical thru-hull mount transducer installations
Flat washer
Rubber
washer
Hull bottom
Hull
bottom
Deep-V Hull
Flat Hull
Fairing block
Figure 1-5 Typical thru-hull mount transducer installations