Furuno 1762C Marine RADAR User Manual


 
6. DATA TRANSFER
6-1
6. DATA TRANSFER
This chapter provides information for saving and replaying data to and from
memory cards, and uploading and downloading data.
6.1 Memory Card Operations
The memory cards function to store data, and the following data can be saved:
Marks/lines
Waypoints/routes
Track
Setting data (plotter only)
6.1.1 Formatting memory cards
Before you can use a memory card it must be formatted. This prepares the card
for use with the system. Note that formatting a memory card erases all saved
data.
1. Insert a blank memory card into the card slot.
2. Press the [MENU] key followed by the SYSTEM CONFIGURATION, DATA
TRANSFER, UPLOAD/DOWNLOAD DATA and SAVE DATA TO MEMORY
CARD soft keys to show the SAVE DATA menu.
TRACKS
OFF
MARKS & LINES
OFF
WAYPOINTS & ROUTES
OFF
SETTING DATA
OFF
SAVE
DATA
EDIT
SAVE
FORMAT
RETURN
Save data menu
3. Press the FORMAT soft key. You are asked if you are ready to format the
memory card.
4. Push the [ENTER] knob to format (or press the [CLEAR] key to escape).
“NOW FORMATTING MEMORY CARD” appears. Do not remove the card
while it is being formatting. When the formatting is completed, “FORMAT
COMPLETED. PUSH ENTER KNOB TO CONTINUE.” appears.
5. Push the [ENTER] knob to continue.
Note: If the memory card was not inserted correctly, the message “FAILED to
FORMAT MEMORY CARD.” appears.