Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-11
ENTER soft key or [ENTER] knob to register your selection.
5. Press the RETURN soft key.
6. Press the [MENU] key to close the menu.
Plotter function keys
Menu Item Function Function Key Label
OFF Assigns no function. —
ADD: ADD NEW WPT Registers waypoint at cursor position. Place
cursor for waypoint location then press function
key.
ADD
MWP: MOVE WPT Moves selected waypoint to different position.
Select waypoint then press function key.
MWP
RUL: RULER Measures range and bearing between two
points. Press START POINT soft key to change
starting point if necessary. Range and bearing
between two points appears at the top of the
screen.
RUL
GWP: GOTO WPT Specify waypoint to set as destination. Enter
number in window and press the ENTER soft
key.
GWP
GRT: GOTO ROUTE Specify route to follow. Enter number in window
and press the ENTER soft key.
GRT
EML: EDIT MK/LINE Displays mark & line menu. Press appropriate
soft key to access menu item.
EML
TRK: TRACK ON/OFF Each pressing stops or starts recording of own
ship track.
TRK
TTM: TTM ON/OFF Turns TTM (target track) display on/off. TTM
DTT: DEL TGT TRACK Erases all TTM track. DTT
ALP: ALPHA LIST Displays waypoint alphanumeric list. ALP
LCL: LOCAL LIST Displays waypoint local list. LCL
RTE: ROUTE LIST Displays route list. RTE
DBX: D. BOX ON/OFF Shows/hides data boxes. DBX
CHG: CHANGE
CNTRL*
Changes control in combination screen. CHG
*: When selecting CHG on a display, use the same soft key number on all
display for CHG.