Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-22
5.7.2 GPS receiver setup
The GPS SETUP menu sets up the GPS Receiver GPS-310B. Press the
[MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and
GPS SENSOR SETTINGS soft keys to display this menu.
GPS
SETUP
EDIT
GPS
STATUS
RETURN
LOCAL TIME OFFSET +00:00
GEODETIC DATUM WGS-84
POSITION SMOOTHING 000 second (s)
SPD/CSE SMOOTHING 005 second (s)
GPS SPEED AVERAGING 060 second (s)
LATITUDE OFFSET 0.000’N
LONGITUDE OFFSET 0.000’E
DISABLE SATELLITE - - - - - -
LATITUDE 45
°
35.000’N
LONGITUDE 125
°
00.000’W
ANTENNA HEIGHT 005 m
GPS FIX MODE 2D/3D
COLD START NO
GPS setup menu
Contents of GPS setup menu
Item Description Settings Default Setting
Local Time
Offset
GPS uses UTC time. If you would
rather use local time, enter the time
difference between it and UTC. Use
the +< - ->- soft key to switch from
plus to minus and vice versa.
-13:30 to +13:30
hours
00:00
Geodetic Datum
Geodetic datum is a reference for
geodetic survey measurements
consisting of fixed latitude, longitude
and azimuth values associated with a
defined station of reference. You
must have the correct geodetic
datum selected in your plotter so that
it will reference the correct point on
the chart for a given latitude and
longitude. Although WGS-84 is now
the world standard, other categories
of charts still exist. Refer to Appendix
for a full list of geodetic datum.
See Appendix for
full list.
WGS-84
(Con’t on next page)