Filter
Top Products
7-1
ADVANCED LEVEL OPERATION
Finding Fish School Center
When you want to find the center depth of a fish school, use the
auto tilt function, which automatically scans the tilt angle within
the selected width.
)m(egnaR)m(egnaR
)m(egnaR
)m(egnaR)m(egnaR)1(htdiW)1(htdiW
)1(htdiW
)1(htdiW)1(htdiW)2(htdiW)2(htdiW
)2(htdiW
)2(htdiW)2(htdiW)3(htdiW)3(htdiW
)3(htdiW
)3(htdiW)3(htdiWdoirePdoireP
doireP
doirePdoireP
001,5701°61°02° snoissimsnart6yreve
002,051""" snoissimsnart4yreve
004,003""" snoissimsnart2yreve
006,0058°"" "
0086°21°61° "
00014°8°21° "
0021nahterom2°4°6°"
For example, when the RANGE control, TILT lever and WIDTH
key are set to 800 m, 8° and width (1), respectively, the tilt angle
varies at every transmission as follows:
8°→8°→10°→10°→12°→12°→14°→14°→12°→12°→10°→10°→
8° →8°→ 6°→6°→4°→4°→2°→2°→4°→4°→6°→6°→8°→
8°
Figure 7-1 Tilt angle setting
How to find fish school center
1. On sub panel 1 or the remote control box, turn on the AUTO
TILT key. The lamp above the key lights on sub panel 1.
2. With the WIDTH key, select scanning width. Auto tilting
begins, with tilt angle set with TILT lever as a center tilt
angle. Successively changing tilt angle is displayed in pa-
rentheses at the upper right of the screen.
3. To change center tilt angle, operate the TILT lever.