Filter
Top Products
8. MAINTENANCE, TROUBLESHOOTING
8-7
8.8 Diagnostic Tests
This unit has 10 diagnostic tests (eight with the CSH-8L) which check it for proper per-
formance. Although the tests are designed primarily for use by the service technician,
they can also be executed by the user to identify defective components. However,
never attempt to check inside the unit; there are no user-serviceable parts inside. Any
repair work is best left to a qualified technician.
8.8.1 Choosing a diagnostic test
1. Press the MENU key to open the menu.
2. Use the RANGE control to choose [MENU MODE].
3. Use the GAIN control to choose [SYSTEM].
4. Use the RANGE control to choose [TEST].
5. Use the GAIN control to choose a test.
6. Press the EVENT key to execute the test.
7. To quit a test, press the MENU key.
**
SYSTEM MENU
**
(RANGE CTRL: U/D, GAIN CTRL: L/R)
[MENU MODE] : SONAR SOUNDER MARKS SYSTEM
DIMMER : 10
DISP SELECT : TEMP CURRENT
HEADING ADJ : 0°
AUTO RETRACT : OFF (OFF, 5-16kt)OFF
SPEED MESSAGE : ON OFF
EXT KP SYNC : OFF ON
AUTO TRAIN SPD : LOW HIGH
AUTO TILT SPD : LOW HIGH
UNIT : METERS FEET FATHOMS PA/BRA
SHIP'S SPD/BR :
LOG/GYRO
CURRENT NAV DATA
GYRO+NAV
LOG PULSE : 200 400
PORT1 BAUDRATE : 19200 9600 4800 2400
PORT1 FORMAT : NMEA CIF
PORT2 BAUDRATE : 19200 9600 4800 2400
PORT2 FORMAT : NMEA CIF
NAV DATA : GPS LC DR ALL
COMBI SCALE : RIGHT LEFT
SUB TEXT INDI : OFF ON
LANGUAGE : ENGLISH ESPANOL DANSK
NEDERLND ITALIANO
NORSK
TEST : SINGLE CONTI PANEL COLOR
: PATTERN SIO ECHO-1 ECHO-2
ECHO-3 ECHO-4
SET TO DEFAULT : EXECUTE
PRESS [MENU] KEY TO EXIT