Filter
Top Products
4-4
7. Pass the gyrocompass cable through the cable clamp and connect it to connector J602 as
shown in the figure below.
8. Attach the clamps to the plastic cover and then attach the cover to the GYRO CONVERTER
board as shown in the figure below. Pass cables thru the clamp ED-1.
Attaching plastic cover for GYRO CONVERTER board
9. Close the processor unit.
1
1
4
1
12
1
3
1
2
1
3
1
12
1
5
1
7
1
3
Screw
M4X8
3 pcs
Plastic cover
Insert cables to these
clamp.
Clamp EDS-1
Clamp CKS-10
-L
Clamp CKS-13
-L