Filter
Top Products
10 Thru-Hull Intelliducer Installation Instructions
If you are using the Intelliducer with an existing Garmin chartplotter, upgrade your Garmin
chartplotter with the latest software to ensure compatibility with the Intelliducer. For more
information, visit www.garmin.com.
Maintenance
You must regularly maintain and clean your Intelliducer to get the best results.
Antifouling paint
If you are using the Intelliducer in salt water, you must coat the submerged surface of the
Intelliducer with antifouling paint. Use only water-based antifouling paint, because other paints
may damage the Intelliducer. Re-apply the paint at the beginning of each season.
Cleaning
Clean the submerged surface of the Intelliducer regularly to keep it clear of aquatic growth. The
performance of the Intelliducer will be greatly reduced if the surface collects a large amount of
growth. Use a scour pad (lightly) and a mild detergent to clean the surface. Avoid scratching the
surface as much as possible.
Physical
Unit Dimensions: 4
19
/
32
in. (116.3 mm) L × 4 in. (101.4 mm) W × 3 in. (76.2 mm) D
Weight: 13 oz. (364 g)
Cables: NMEA 2000 drop cable — 19 ft. 8 in. (6 m)
NMEA 0183 power/data cable — 29 ft. 6 in. (9 m)
Temperature range: From -15°C to 33°C (from 5°F to 91°F)
Case Material: PC/PBT and ASA plastic
Power
Power input source: NMEA 2000 — 9–16 Vdc
NMEA 0183 — 9–33 Vdc
Fuse (NMEA 0183): 2 A
Main power usage: 2 W max
NMEA 2000 Load Equivalency Number (LEN): 4
Sonar
Power: 150 W (RMS), 1,200 W (peak-to-peak)
Frequency: 160 kHz
Depth: 900 ft. (275 m) (Depth capacity is dependent on water salinity, bottom
type, and other water conditions.)