Filter
Top Products
28 VHF 300 Series Owner’s Manual
Digital Selective Calling
Sending Voicemail
You can record a 15-second voicemail message and send it to another vessel. When you
send the voicemail, the radio will call the other vessel and transfer the voicemail if the other
vessel responds with an acknowledgement message. The icon is displayed when you
have an outgoing voicemail message.
If the radio is unable to successfully transmit your voicemail within one hour, the radio
prompts you to retry or cancel the call. If you do not make a selection after three minutes,
the call is cancelled automatically.
To record a voicemail message:
1. Select DSC > VOICEMAIL > MESSAGE.
2. Press the PTT key to record your voice message. You can record up to 15 seconds.
NOTE: If you want to rerecord your voicemail message, press the PTT key again.
To listen to a voicemail message:
1. Select DSC > VOICEMAIL > MESSAGE.
2. Select LISTEN.
To delete a voicemail message:
1. Select DSC > VOICEMAIL > MESSAGE.
2. Select DELETE.
To transmit a voicemail message:
1. Select DSC > VOICEMAIL > SEND VOICEMAIL.
2. Select an entry from the directory.
3. Use the CHANNEL knob to select a channel.
4. Select CALL. The radio calls the other vessel and transfers the voicemail if the other
vessel responds with an acknowledgement message.
Automatic Identication System
The VHF 300 AIS and VHF 300i AIS are equipped with Automatic Identication System
(AIS) receivers. AIS information can be sent over a NMEA 2000 network or a high-speed
NMEA 0183 network, depending on the communication protocol settings (see page 30).
To turn AIS on or off:
Select MENU > AIS > ON (or OFF).