Filter
Top Products
3-24
Garmin GNC 255A/255B Pilot’s Guide
190-01182-01 Rev. A
3.6.2 Setting Up the Count Up Timer
1. Press FUNC to access the Functions. Turn the LARGE knob
to select the Timer (TMR) function. Turn the SMALL knob to
select the Count Up Timer function. Now, press the ENT key.
Select Count Up Timer
Figure 3-44 Select the Count Up Timer Function
2. Press the ENT key to Start or Stop the timer. Press the CLR key
to reset the timer to 0:00.
Press ENT to Start
or Stop the Timer
Press CLR to Reset the Timer
to 0:00
The Default (Starting) Value
Figure 3-45 Selecting the Count Up Timer
3.6.3 Viewing Timers in the Com Display
When a timer is active, the timer value will be shown in the lower right
corner of the Com display. While both timers may be actively counting at the
same time, the Count Down Timer will have precedence in being shown. If the
Count Down Timer is paused, the Count Up Timer will then be shown until the
Count Down Timer is restarted.
Timer Value
Figure 3-46 Timer Value Shown in the Com Display
1. Pressing CLR and then ENT will reset the displayed Timer.
Figure 3-47 Stop or Clear the Timer in the Com Display
2. Pressing ENT twice will stop the displayed Timer.