Garmin 4010 Marine GPS System User Manual


 
GPSMAP
®
4000/5000 Series Owner’s Manual 25
Where To?
Where
To?
Creating and Using Routes
You can create and store up to 20 routes with up to 250 waypoints each.
To create a route from your present location:
1. From the Navigation chart, use the map pointer ( ) (GPSMAP 4000 series) or touch your
destination (GPSMAP 5000 series) to select your destination.
2. Select Navigate To > Route To.
3. Use the map pointer ( ) (GPSMAP 4000 series) to select the location at which you want to
make the last turn, or touch the location (GPSMAP 5000 series) at which you want to make the
last turn toward your destination.
4. Select Add Turn.
5. To add additional turns, select the point at which you want to make the turn (working backward
from the destination) and select Add Turn.
6. Select Done to nish the route, or select Cancel Route to delete the route.
To create a route in another location:
1. From the Home screen, select Information > User Data > Routes > New Route > Use Chart.
2. Select Use Chart or Use Waypoint List.
3. If you selected Use Chart, use the map pointer ( ) (GPSMAP 4000 series) or touch the
location (GPSMAP 5000 series) to select the initial location at which you want to start the new
route. If you selected Use Waypoint List, select the rst waypoint on the route.
4. Select Add Turn to mark the starting point of the route.
5. Choose the location of the rst turn and select Add Turn. Repeat until the route is complete.
6. Select Done.